|
Ring Settings
The IP phone has 9 ring tones and a no
ring (Disable Ringer) option for
incoming call notification. There is also the option to assign each phone book
record one of the ring tones for inbound calls. The Default Ring Tone is used when a ring tone is Set as Default or not defined for a line or phone book record.
In quieter environments, it might be
useful to delay the ring signal on incoming calls. Ringing can be delayed by up
to 10 seconds. The LED light associated to your extension will flash
immediately for all incoming calls.
Default Ring Type
To change the Default Ring Type for the
IP phone:
Press the  button, then select 3. Phone Settings then 2.
Ring Settings
Select 1. Default Ring Type.
Scroll through Ring Types using the Down softkey. Press the Play softkey to hear the selected tone.
Press the Select softkey to change to the selected Ring Type.
To configure another parameter, press
the Back softkey to continue or
press the button to exit the configuration menu.
Line Ring Setting
To adjust the Ring Type for a line:
Press the button, then select 3. Phone Settings then 2.
Ring Settings.
Dial the line number plus one (2 for
Line 1 or 3 for Line 2), or move the cursor to Line n Configuration using
the Down softkey and press the Select softkey. The value of n
is the line button number.
Press the  digit, or move the cursor to 1. Ring Type using the Down softkey and press the Select softkey.
Select the Ring Type using the Down softkey. Press the Play softkey to hear the selected tone.
The Disable Ringer selection turns
the ringer off for incoming calls on the line. The Set as Default uses the Default
Ring Type for incoming calls on the line as specified in the previous
Default Ring Type section.
Press the Select softkey to save the selection.
To configure another parameter, press
the Back softkey to continue or
press the button to exit the configuration menu.
Delayed Ring
The phone can delay when the audible
ring tone is played for incoming calls by up to 10 seconds. To configure the
Delayed Ring option:
Press the button, then select 3. Phone Settings then 2.
Ring Settings.
Move the cursor to Line 1 Settings using the Down
softkey and press the Select
softkey. Repeat for Line 2.
Press  or move the cursor to 2. Delayed Ring Timer using the Down softkey and press the Select
softkey.
Enter the delay time as 0 to 10
seconds in 1-second increments. 0 provides no delay; the ring signal is
immediate.
Press the OK softkey to save the delayed ring setting.
To configure another parameter, press
the Back softkey to continue or
press the button to exit the configuration menu.
Disable Ringer
The TS-350i can be programmed not to
ring when an incoming call is received. It will still light up the LCD, light
up the Incoming Call Indicator and show the Caller ID.
To disable the ringer:
Press the button, then select 3. Phone Settings, then 3. Disable Ringer
Press the Yes softkey to turn the ringer off, or press the No softkey to leave the ringer enabled.
To configure another parameter, press
the Back softkey to continue or
press the button to exit the configuration menu.
|
