Search of Knowledge Base Library of Articles & Videos:  
You are here: Knowledge Base > Installation
Programming TS-9133i or TS-9143i Function Keys
Last Updated: 01/13/2012
Step 1:  Log in to the TalkSwitch by using the latest version of the TalkSwitch Management Software.
 
Step 2:  Click on Local Extensions / Fax under the Configuration Menu on the left side.
 
Step 3:  Select the extension from the list. 
 
Step 4: Click Configure Keys. This button is enabled if the IP Extension Details area is complete. The TalkSwitch 9133i window appears
 
Step 5:  For each key, select the Function and the Resource (if applicable). The function keys can be assigned for Line Appearance, Extension Appearance, Voicemail, Do Not Disturb (DND), Park, Unpark, Call Pickup (any or specific extension), Intercom Page, or Overhead Page (details below)
 
Step 6:  You can apply predefined key assignments from a template file using the Open Template button and by pressing the Save Template As.. to save the template
 
 
•
Line appearance — Select a telephone line or VoIP number as the resource. The corresponding button or softkey will display the status of the line, and allow you to make calls with a single press of the button or softkey.
For phones equipped with button lights, the button will light up when the line is in use, flash if the line is ringing, or be off when the line is available.
For phones with softkeys, a status icon and line ID will be displayed beside the softkey. The display will show an off-hook icon when the line is in use, show a ringing icon when the line is ringing, and show an on-hook icon when the line is available.
•
Extension appearance — Select a local extension as the resource.
The corresponding button or softkey will display the status of the selected extension, and allow you to call the extension with a single press of the button or softkey.
For phones equipped with button lights, the button will light up when the selected extension is in use, flash if the extension is ringing, or be off when the extension is available.
For phones with softkeys, a status icon and extension call ID will be displayed beside the softkey. The display will show an off-hook icon when the selected extension is in use, show a ringing icon when the extension is ringing, and show an on-hook icon when the extension is available. The extension call ID is also be displayed.
•
Queue appearance — Select a local extension as the resource. The corresponding button or softkey will indicate whether calls are queued at the selected extension, and allow you to pick up the oldest queued call with a single press of the button or softkey.
For phones with softkeys, a status icon, extension number and “Q” will be displayed beside the softkey. The display will show a ringing icon if calls are queued for the extension, or an on-hook icon when there are no queued calls.
•
Voicemail — Do not select a resource. Press the button or softkey to access the voice mailbox of the local extension. Lights or icons are not used for voicemail keys. Note: You can also access Voicemail by pressing **#.
•
DND — Do not select a resource. Press the button or softkey to toggle Do Not Disturb mode on or off. Lights or icons are not used for DND keys. Note: You can also toggle DND mode by pressing *62#.
•
Park — Do not select a resource. Press the button or softkey to put the call on hold, in the next available park orbit. The system will respond with the park orbit number (500 to 509). Lights or icons are not used for Park keys. Note: You can also Park a call by pressing *510# on a TS-350i, or *510# on a TS-450i or TS-550i, or *510# on a TS-9112i, TS-9133i, TS-9143i or TS-480i.
•
Un-park — Do not select a resource. Press the button or softkey, select the park orbit number (500 to 509), then press Unpark to retrieve the call. Softkey displays will show the parked call ID beside the orbit number. Lights or icons are not used for Unpark keys. Note: You can also Unpark a call by lifting the handset, pressing **, dialing the park orbit number, then pressing #.
•
Pickup any — Do not select a resource. Press the button or softkey to answer a call from an outside number ringing any extension. Lights or icons are not used for Pickup keys. Note: You can also pick up a call by pressing *9#.
•
Pickup ext — Do not select a resource. Press the button or softkey, dial an extension, then dial # (or softkey again) to answer a call from an outside number or extension ringing the selected extension. Lights or icons are not used for Pickup keys. Note: You can also pick up a call at a selected extension by pressing *7, dialing the extension, then pressing #.
•
Intercom — Do not select a resource. Press the button or softkey, dial an extension, then press # to page the extension in Intercom mode. The intercom page function can only page TalkSwitch phones. Lights or icons are not used for Page keys. Note: You can also page a TalkSwitch phone by pressing *84, dialing the extension, then pressing #, or the Dial key or softkey.
•
Overhead page — Do not select a resource. Press the button or softkey to connect to an attached external PA system. Lights or icons are not used for Page keys. Note: You can also page the external PA system by pressing *0#.
•
Queue (show list) — Do not select a resource. Press the Queue softkey, select a queued call, then press Retrieve to connect to the selected call. This function is only available when programmed as a function key on supported phone models (e.g. TS-480i).
•
Phone book — Select the phone book record two-digit speed dial number as the resource. Press the button or softkey to place a call using the contact information from the associated phone book record. When the button is pressed, it will light up for the duration of the call. This function is available on the TS-350i, TS-450i and TS-550i models.
•
User Defined (phone) — The button or softkey function is assigned using the phone's configuration options, and is not assigned using TalkSwitch Management software.
•
None — The button or softkey is not programmed.
•
System speed dial — Select the desired resource fromspeed dials configured on the System Speed Dials page. Press the button or softkey to call the resource.
•
Group page — Select Ring/Page group. Press the button or softkey to page the phones in the group. Not all phones can receive pages.


Was this article helpful?

Comments:
 

Related Articles
 > Issues dialing out - Message from Phone Company
 > Adding Telephone Lines
 > Line Calibration / Optimization
 > Configuring an External IP Phone
 > Using the TS-350i / TS-550i Phones (User Guides)
 > Using TS-9133i or TS-9143i or TS-9112i or TS-480i Phones (User Guides)
 > Cannot Connect Through the TalkSwitch Management Software
 > Phone Utility - Upgrade Firmware
 > Extension Can't Receive Calls
 > Can't Make or Receive Calls From Extension
 > Can't Access Voicemail
 > Fraudulent Call Mitigation For Phone Systems
 > Static/Echo/Low Audio on the Phones
 > Talkswitch / Fortivoice 350i or 550i IP Phone Not Booting Up
 > How to Delete a Voice Mailbox Password or Reset Voice Mailbox
 > Update the phone system Firmware Manually
 > How to Update the TalkSwitch Management Software and Firmware
 > Caller ID for VoIP Numbers
 > Adding TS-350i, TS-450i, and TS-550i IP Phones
 > No Date and Time Stamp in Voicemail
 > Unable to Dial Out - Access Code Message
 > Configuring Analog Telephone Lines
 > Adding WAV Files to TalkSwitch System
 > VoIP Caller ID
 > Programming TS-480i Softkeys
 > Programming TS-450i Function Keys
 > Programming TS-350i Function Keys
 > Programming TS-550i Function Keys
 > Configuring an Auto Attendant Menu
 > Web Recovery Solution
 > Activating the PowerPack
 > Adding an Additional TalkSwitch Unit to the Network
 > Adding Remote Extensions (To Call Outside Cell Phones or Land Lines)
 > Setting up Call Handling (Local/Remote Extensions)
 > Configuring Auto Route Selection (ARS) to Block International Calling
 > Deactivating Users and Extensions
 > How to Reset Talkswitch Configuration Password
 > Changing the Date and Time of the TalkSwitch System
 > TS-450i/TS-550i Phone Locked (Screen is blank)
 > Unable to Log into BestDealTalk.com Account
 > IP phone Blinking Red and Yellow
 > Accessing Voice Mailbox from Outside Line
 > Static on the Line (Hardware Troubleshooting)
 > TS-850i Error: "No IP address" and "Ethernet disconnected"
 > On-Hold/Ringback Options
 > Using the Phonebook Directory via TalkSwitch Handset
 > Unable to Obtain IP Address
 > IP Phone Will Not Register
 > Ring Settings
 > Ring Settings
 > Defaulting/Rebooting TS-9133i Phone
 > Using GMX.com as Your E-mail Server
 > Setting up Email Service
 > Backing up you Talkswitch Configuration
 > Registering your Fortivoice / Talkswitch System
 > Best Deal Talkswitch - Technical Support Plans
 > Talkswitch Firmware Upgrades
 > Talkswitch Static (Gigabit Switch connection)
 > CP Log
 > Programming a Grandstream IP phone
 > CONFIGURING THE ROUTER
 > Talkswitch System Set-up Assistance, Administrator Training and Customonization Support
 > Answering additional incoming call with a call pickup
 > Internal Extensions Busy/ Going to Voicemail
 > Using command mode from an analog phone to retrieve the Talkswitch PBX IP address
 > LINE HUNT GROUPS
 > Rebooting a TalkSwitch Unit
 > Lights Blinking Left to Right on TalkSwitch Unit
 > Auto Attendant, Call Forwarding, and Voicemail Not Working- Language Options Problems
 > Bluetooth Pairing Issues
 > 860I handset and base pairing / registration issues
 > Configuring a Polycom SoundStation IP 6000 conference phone
 > Connecting PA system for overhead paging
 > Refuse Call Softkey Button
 > Forinet Voice System has an IP address of 0.0.0.0
 > 350I, 450I, 550I Firmware Recovery
 > TalkSwitch TS-850i or TS-860i IP phone randomly displays Ethernet Disconnected
 > Fortivoice Console dropping or losing calls
 > Polycom IP Phones
 > Date and Time issue on TalkSwicth / FortiVoice systems
 > Updating the Fortivoice Management Software and Firmware
 > Configuring an 860I as an external IP extension
 > Using X-Lite softphone with a Talkswicth / Fortivoice system
 > Fortivoice Management Software Line Optimization Issue
 > 860I wireless base station is not receiving an IP address
 > Cannot connect with management software due to IP address
 > SIP / Internet telephone connection issues
 > Talkswitch Auto-Discovery not working
 > Fortivoice 60 series IP phones and TalkSwitch compatibility
 > Transferring a console license to a new system
 > Manual firmware update for Fortivoice 350I/450I/550I Phones
 > Fon-360I phone randomly disconnects or just quit working
 > FortiVoice 350i telephone officially discontinued, x60I Series compatibility.
 > FortiVoice Click to Dial Software
 > FortiVoice Console Download and Configuration
 > FON-860i handset battery replacement
 > Resetting an Fortivoice FVC System to Factory Defaults
 > FortiVoice FON-870i phone system compatiblity
 > Error Message when opening Tallkswitch management software 6.12
 > IP Phone / Extension not working "User Busy"
 > Voice Mail Box prompts issue
 > Voice mail softkey missing on FON-360i, 460i and 560i phones
 > Changing Unit ID of a Talkswitch / Fortivoice System